WOWBuildings War Across Europe 3D Printing stl Files.
Yes let me define what mine are, the trial and error and fix is more the detail loss at low scales the dimensions and walls should be fine.
OK i used to make walls 3mm thick to keep print times and filament use down, but with them now needing to go down to 6mm i have started moving them to 5mm thick this should allows enough detail for them to be viable, its the finer detail like brickwork etc that can be hit and miss, to be fair its been OK on the tests.
now then for scales and the debate can go on but the point is no matter what scale i do the can be adjusted to whatever you want so i have always and still do stick to a rule when starting a design and that's the standard door height.
so all of these designs and all in the future from fantasy to sci fi and everything in between my standard door will be 32mm high, if you scale that down to 76% it gives a 24mm door and to 52% for a 18mm door, that covers 15 and 20mm figures, if you want your doors smaller or bigger just add or take off 1% but you wont be far out. 6mm we are talking going down to 31% for a 9-10mm door height, so that is as definitive as i can get, the rest is personal choice so a percentage here and there is down to the user............like i have said this is a debate that can go on and on but that is where i have set me bar height at and that's where it will stay or I'll just spend all my time altering door heights.
Kickstarter
WOW Buildings
No comments:
Post a Comment