War Across Europe 3D Print STL files, Kickstarter from WOW Buildings

About

WOWBuildings War Across Europe 3D Printing stl Files

Here we go with a range of buildings and accessories that stretch from Normandy to Stalingrad.

All of the buildings (except some general ruins) are based on actual buildings that existed

so let's get down to it and show you what you get in the starter pack.

for the Infantry backing level you get the following starter pack files and any opened stretch goals

all of these files will come initially in 28mm scale but we have designed these to now scale down to 6mm scales (some detail will be very fine but test prints have shown they are ok)

this is 6mm scale of the ruin from the starter pack


FREE TEST FILE

not done this before but i cant think why, ok the link below has a fire station facia for you to test print, there is a 28, 15 and 6mm scale ready to slice and print, this way you can see for yourself the quality and get an idea of how good these designs turn out

https://drive.google.com/open?id=1sBZDBARaDrIDCaOgIJWiux_uTXEX0siR

STARTER PACK

CARENTAN CENTER STREET PACK 1

STALINGRAD DEPARTMENT STORE

GENERAL RUIN 1 This file set contains the full building and the ruined version

CORNER RUIN

BONUS FUNDING OPENED WITHIN ONE HOUR STALINGRAD CHIMNEYS

STRETCH GOAL £1000 OPENED STALINGRAD FLOUR MILL

STRETCH GOAL £1500 OPENED CARENTAN CENTER STREET SET PACK 2

STRETCH GOAL £2000 OPENED BRECOURT MANOR

STRETCH GOAL £2500 OPENED STALINGRAD TRACTOR FACTORY ENTRANCE

STRETCH GOAL £3000 OPENED STALINGRAD TRAIN STATION

STRETCH GOAL £3500 OPENED STALINGRAD FIRE STATION

 STRETCH GOAL £4000 OPENED JUNO BEACH HOUSE

STRETCH GOAL £4500 OPENED JUNO BEACH HOUSE ATLANTIC WALL

STRETCH GOAL £5000 OPENED PEGASUS BRIDGE

STRETCH GOAL £5500 OPENED LARGE CHURCH RUIN (wip)

STRETCH GOAL £6000 OPENED MERVILLE BATTERY BUNKERS

STRETCH GOAL £6500 LOCKED CHURCH

STRETCH GOAL £7000 LOCKED DUTCH BANK AND GENERAL RUIN (TO BE ADDED)

STRETCH GOAL £7500 LOCKED NORMANDY STREET RUIN SET

STRETCH GOAL £8000 LOCKED DEADMANS CORNER (CARENTAN)

STRETCH GOAL £8500 LOCKED PAVLOVS HOUSE

STRETCH GOAL £9000 LOCKED EURO STYLE BRIDGE (SECTIONED SO YOU CAN EXPAND IT TO YOUR OWN LENGTH)

STRETCH GOAL £9500 LOCKED BONVILLE MANOR (wip PICTURES IN THE UPDATE)

£10000 STRETCH GOAL LOCKED DOCKYARD SETUP

i will be adding to this and adjusting some of the buildings slightly but overall it will only be better and more than it is now

LOTS AND LOTS MORE TO ADD

STALINGRAD TRACTOR FACTORY BUILDINGS

STALINGRAD GRAIN MILL

DUTCH TOWN CENTRE

TO LIST JUST A FEW

Risks and challenges

DIGITAL MEDIA:
We strive to produce models that will print with as little support and parts as possible. Some models print in one go whilst most are split up into parts which must be printed separately and then assembled.

The file format of choice will be .STL and the models shall be zipped and made available to the user for download. The user is responsible for downloading their product and must have a valid Internet connection and email with which to collect their reward, via Internet download. We will keep the files on our system for at least three months after the first date of issue. The user must ensure that he collects the files within this time frame or risk forfeit.

Backers must realise that the resolution you obtain on your print is down to the system you use. Our high resolution files will give you almost render quality prints on high end SLA machines, whilst the same files will produce lesser resolution prints on standard FDM printers. At any rate, all the files have been previously tested on SLA and FDM printers and have shown satisfactory produce.

We recommend FDM Prints with at least a 400 micron nozzle and 200 micron layer height for terrain. A 100 micron layer height will give you outstanding prints all round. We have also tested the files with larger nozzles, at 500 microns and decent results are possible on most prints, if the layer height and temperature is controlled correctly. 0.5(500 micron) nozzles are not recommended for miniature printing.

SLA printers should have no problems obtaining excellent resolution and finish even at 100 micron layer height although 50 micron layer height is recommended for minute sculpt detail clarity. We will try our best to split models so they will fit in smaller print beds like those found on SLA machines. Although miniatures and figurines can be split into smaller parts, large terrain pieces will require a standard 220x220mm print bed. Standard for FDM Printers like the 'Ender3'

We supply the user with a design that has been tested on conventional home hobby printers and is proven to print.

All the models are tested and sliced with 'Cura' software which is freeware and available to all backers for use. We recommend that backers use 'Cura' as it is fully tested with our models and we can offer customer support, if any problems are encountered. We are unable to give customer support for other slicing software and backers use this at their own risk.

When using our digital media, we do not hold ourselves responsible for the production or manufacturing process of the design, this is exclusively up to the user.

Users may modify models and files at their own risk and only for their own personal use. Modified files are not guaranteed by us and as such, users do this under their own risk and know how.

The Images shown on the campaign page are just for visualisation and although they may come very close, they are not an exact representation of the final design or printed model, which may vary.

We reserve the right to alter any of the models shown, at any time, before delivery, with the intent of improving the design, or efficiency of production.

Kickstarter
WOW Buildings